C64 Joystick with 4 buttons and variable rapid fire V1

You can download all these files from my Git repository: https://github.com/Technische-Dienstleistungen-Niggemann/osa-stick
3D printed parts
Compatible with Open Source Arcade Stick V0.9
Other parts
Image | Description | Amount |
---|---|---|
![]() | Buttons 30mm diameter 5V LED | 4 |
![]() | Potentiometer Kit 5k Ohm | 1 |
![]() | 555 IC NE555P | 1 |
![]() | Resistor 1k Ohm 0,125w | 1 |
![]() | Resistor 1,8k Ohm 0,125w | 1 |
![]() | Ceramic Capacitor 10nF 50V | 1 |
![]() | Electrolytic Capacitor 47uF 16V | 1 |
![]() | Prototype DIY PCB Small | 1 |
![]() | 9 pin cable 9 pins 1m to 1,8m length | 1 |
![]() | Rubber foot 3mm hole 6mm height 11mm max outer diameter | 4 |
![]() | Countersunk head screw M3 x 12mm | 8 |
![]() | Knurled Nut M3 x 5mm 4,5mm outer diameter | 4 |
![]() | Hex nut M3 | 4 |
The circuit

On my GitHub repository you can also find Gerber files to produce a corresponding circuit board for this circuit.